Multi-Tech Systems MA220 사용자 설명서

1.

  In the MultiAccess 

 screen, go to the 

fields. 

 

2.  Fill in the IP information that applies to your MultiAccess unit. The fields 

for “IP Address,” “Subnet Mask,” “Default Gateway” and “Name Server” 
are required.  A “Secondary Name Server” may be considered optional. 

3. Click 

Update.  After the Update button has been clicked, it takes 5 

seconds for the page to update. 

In Setting the Admin PC to the network number of the MultiAccess, you 
recorded the original IP address of the administrator’s PC and then reset it to 
the IP address required to allow communication with the MultiAccess unit.  You 
may now set the IP address of the administrator’s PC back to its original value 
or to any other value that will allow you to communicate with the MultiAccess at 
its new IP address. 

Having reset the IP address of the administrator’s PC, you must log into the 
MultiAccess software again.  Enter the MultiAccess’s new IP address into your 
browser.  The Login screen should appear.  

1. From the Administration screen, go to the SMTP Configuration fields. 

 

2.  Enter the mail server address in the SMTP Server Address window (e.g., 

mail.multitech.com). 

3. Enter 

the 

SMTP Port  (usually 25) that is used by the SMTP Server.