JVC LPT1100-001A 사용자 설명서
Filename [DX5SEU_13Subsidiary.fm]
Masterpage:Left+
82
TROUBLESHOOTING
Page 82Thursday, 1 September 2005 13:26
Playback (DV Deck)
●
The DV deck is not selected.
the remote control so that the DV lamp lights up on the unit.
●
The tape is already fully rewound or fast-forwarded.
] Check the cassette.
●
The TV is not set to the AV mode.
] Set the TV to the AV mode.
●
This is normal.
●
The video heads may be dirty.
] Use a dry cleaning cassette M-DV12CL, or consult your JVC
dealer.
Recording (DVD Deck)
●
The channel position does not correspond to that in the
receiving area.
receiving area.
] Set the correct channel position for the receiving broadcast.
●
No disc or a disc not being compatible with the unit is loaded.
] Load a recordable disc on the unit. (A pg. 5)
●
The disc loaded is not formatted.
] Format the disc. (A pg. 78)
●
A finalised DVD-R disc is loaded.
] Recording cannot be made on finalised discs. Load a
recordable disc on the unit.
●
The disc is full or does not have enough space for the title to be
recorded.
recorded.
] Clear unnecessary titles on the disc or load a blank disc.
●
The DVD-RAM disc loaded has had its protect tab slid to the
protect position.
protect position.
] Release the protect tab. (A pg. 8)
Recording (HDD Deck)
●
AL-1B, AL-2B or AF-1B has been selected as the input mode.
] Set to the desired channel.
●
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
●
The input mode is not correct.
] Set the input mode to
Recording (DV Deck)
●
The unit is in the Record Pause mode.
] Press I to resume recording.
●
There is no cassette loaded, or the cassette loaded has had its
erase protection switch set to
erase protection switch set to
] Insert a Mini DV cassette, or set the erase protection switch set
●
An attempt has been made to record from this unit’s built-in
tuner.
tuner.
] It is not possible to record from this unit’s built-in tuner to the DV
deck. Record to the HDD or a DVD disc.
If you want to record on a DV tape, record by connecting the
output of the external equipment such as a satellite receiver to
this unit’s external input ([L-2 IN/DECODER], etc.).
If you want to record on a DV tape, record by connecting the
output of the external equipment such as a satellite receiver to
this unit’s external input ([L-2 IN/DECODER], etc.).
●
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
●
The input mode is not correct.
] Set the input mode to
●
The end of the tape was reached during recording.
] The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
record the entire programme.
●
ADV AUDIO RECB had been set to A16BITB at the original
recording.
recording.
] Set
ADV AUDIO RECB to A12BITB at the original recording.
●
The tape speed had been set to LP at the original recording.
] Set the tape speed to SP at the original recording.
] This is normal. Monitor the sound using the connected devices.
The DV deck cannot be operated.
The tape will not rewind or fast-forward.
The playback picture does not appear while the tape is
running.
running.
Noise appears during visual search.
The playback picture is blurred or interrupted while TV
broadcasts are clear or
broadcasts are clear or
message appears on the screen.
The desired programme cannot be recorded.
Recording cannot be made.
TV broadcasts cannot be recorded.
Camcorder recording is not possible.
During recording, the tape does not run. The DV recording
lamp lights up on the unit.
lamp lights up on the unit.
Recording cannot be done.
Camcorder recording is not possible.
The tape is automatically rewound, then the unit is shut off.
Audio dubbing is not possible.
Monitoring the audio dubbed sound is not possible during
audio dubbing.
audio dubbing.
DX5SEU_00.book Page 82 Thursday, September 1, 2005 1:26 PM