JVC ENLPT0736-001B 사용자 설명서

다운로드
페이지 104
Filename [HM-HDS4EX_07Sub.fm]
Masterpage:Left
96
 
EN
Page 96
April 2, 2003 3:11 pm
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are 
often easily corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
TAPE TRANSPORT
PLAYBACK
RECORDING
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. No power is supplied to the 
recorder.
● The mains power cord is 
disconnected.
Connect the mains power cord.
2. The clock is functioning properly, 
but the recorder cannot be 
powered.
● “
#
” is displayed on the front 
display panel with “AUTO TIMER” 
set to “OFF”.
Press the 
#
 button to turn the “
#
” 
indicator off.
3. The remote control won’t function.
● The batteries are discharged.
Replace the dead batteries with new 
ones.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. During recording, the tape does 
not run. “
” lights up and the 
channel display blinks on the front 
display panel.
● The recorder is in the Record Pause 
mode.
Press 4 to resume recording.
2. The tape will not rewind or 
fast-forward.
● The tape is already fully rewound or 
fast-forwarded.
Check the cassette.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The playback picture does not 
appear while the tape is running.
● The TV receiver is not set to the AV 
mode.
Set the TV to its AV mode.
2. Noise appears during visual 
search.
● This is normal.
3. Noise appears during normal 
playback.
● The automatic tracking mode is 
engaged.
Try manual tracking. (
pg. 41)
4. The playback picture is blurred or 
interrupted while TV broadcasts 
are clear or “USE CLEANING 
CASSETTE” message appears on 
the screen.
● The video heads may be dirty.
Use a dry cleaning cassette ECL-3F or 
consult your JVC dealer.
5. Breaks are noticeable in Hi-Fi 
soundtrack.
● The automatic tracking mode is 
engaged.
Try manual tracking. (
pg. 41)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Recording cannot be started.
● There is no cassette loaded, or the 
cassette loaded has had its record 
safety tab removed.
Insert a cassette, or using adhesive 
tape, cover the hole where the tab 
was removed.
2. TV broadcasts cannot be 
recorded.
● “L-1”, “L-2”, “F-1”, “D-1”, “DUB“ 
or “SAT” has been selected as the 
input mode.
Set to the desired channel.
HM-HDS4EX.book  Page 96  Wednesday, April 2, 2003  3:55 PM