JVC LPT1029-001A 사용자 설명서

다운로드
페이지 92
Filename [MH50SEK_09Timer Recording.fm]
Masterpage:Left+
TIMER RECORDING
Page 48Friday, 14 January 2005  16:44
Weekly/Daily Recording
You can record programmes with one of the following weekly/daily 
timer settings.
For the HDD deck
When you select a mode other than ONCE, the space on the hard 
disk drive is saved for new recordings by overwriting previous 
recordings. To prevent loss of a needed recording, backup 
programmes you wish to save by dubbing them to DVD discs 
before overwriting previous recordings. Or save the title of weekly/
daily programmes to avoid overwriting of a previous week/day. 
(A pg. 50)
 (One Time Recording)
In this mode a programme will not be automatically overwritten.
 (Weekly Recording/Weekly Overwrite)
When the set weekly programme is broadcast, the programme 
recorded last week is automatically deleted and overwritten by 
the new programme. Save the title of each programme you 
wish to save, then the recorded programme is saved and will 
not be overwritten by the new programme.
 (Daily Recording/Weekly Overwrite)
When the set weekly programme is broadcast, the programme 
recorded on the same day last week is automatically deleted 
and overwritten by the new programme. Save the title of each 
programme you wish to save, then the recorded programme is 
saved and will not be overwritten by the new programme.
When the set daily programme is broadcast, yesterday’s 
programme is automatically deleted and overwritten by the new 
programme. Save the title of each programme you wish to 
save, then the recorded programme is saved and will not be 
overwritten by the new programme.
For the DVD deck
 (One Time Recording)
 (Weekly Recording)
 (Daily Recording)
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery 
Control) and VPS (Video Programme System) are services 
designed to assure safe, accurate timer recording. With this 
system, special code signals are transmitted together with the 
audio/video signals. These code signals control your video unit 
and have precedence over the advertised times you may have 
preset into the timer. This means that your unit will start and stop 
recording when the preset TV programmes actually start and 
end^even if the broadcast time of a preset TV programme is 
changed from what has been advertised. PDC is currently 
available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a 
few small relay transmitters. Ch.3 operates a PDC service in some 
areas. All channels intend to offer this service in due course. 
Check your TV programme listing guide for latest information. If the 
channel you intend to record does not offer a PDC service your 
unit will not start recording if PDC has been selected. Be sure to 
set PDC to 
AOFFB if PDC is not available on your selected channel. 
Make sure to presVPS/PDC
programming procedure to activate the VPS/PDC recording 
function. The VPS/PDC recording indicator lights up on the front 
display panel when VPS/PDC recording function is activated. 
However, it will blink rapidly when VPS/PDC
j is pressed under 
the following conditions:
Clock is not set.
Timer programming has not been set.
Disc is not loaded.
HDD is full.
When you use Manual Timer Programming, set the start time 
(VPS or PDC time) exactly as advertised in the TV listing. A 
different time than advertised will result in no recording.
VPS/PDC recording is also possible when a satellite receiver or a 
cable system is connected to [L-2 IN/DECODER] connector on 
your unit.
VPS/PDC recording is also possible via the [L-1 IN/OUT] 
connector.
When timer recording via VPS/PDC recording is in progress, it is 
not possible to switch between the HDD and DVD deck, and the 
following menus cannot be displayed:
Main Menu
Library Database Navigation Menu
Editing Menu
If the unit is powered on when set to record a timer programme 
onto HDD/DVD using VPS/PDC, the PDC information will not be 
used. The programme will be recorded using the start and stop 
times originally programmed.
How to check if the station being received transmits a VPS/
PDC signal
A Hold down DISPLAY for about 5 seconds. AVPS/PDCB appears 
and blinks on the front display panel. If a VPS/PDC signal is 
detected from the station, 
AVPS/PDCB will stop blinking. If no 
VPS/PDC signal is detected from the station, 
AVPS/PDCB will 
blink at a slower rate.
B Press DISPLAY again to return to normal display.
Overwritten
This week’s drama
Last week’s drama
Overwritten
This 
week
Last 
week
MON
TUE
WED
THU
FRI
MON
TUE
WED
THU
FRI
Overwritten
Tuesday’s programme
Monday’s programme
MH50SEK_00.book  Page 48  Friday, January 14, 2005  4:44 PM