Maxtor NVR-2028 사용자 설명서

9. Wireless Network Configuration

9.1 Configure Your NVR-2028 Network Settings

Upon wireless network hardware connection, you need to activate the wireless network function

and configure the proper network settings of the NVR.

9.1.1 Enable DHCP Function

Use the “

” and “v” buttons

, and

, to highlight NET DHCP; select ON. Then press the

Enter button to proceed.

NOTE: This function can only work if the LAN which the unit is connected to has a

DHCP server. If the DHCP server is working, the NVR will obtain an IP address

automatically from the DHCP server. In that case please skip the section 9.1.2

(Set IP address) and follow section 9.3 (TCP/IP Communication Software).

9.1.2 Set IP Address

You don’t need to set a NET IP for the unit if the LAN which the unit is connected to has a

DHCP server. Otherwise, please follow the instructions given below:

MAIN MENU

LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM

GOTO COMM PAGE

COMM SETTING

WIIRELESS : SET

WAN SETTING

: SET

NET IP

: SET

NET DHCP

: SERVER

LEASED IP TABLE : ENTER

COMM ID

: 01

RS232

: ON

MAIN PAGE

SET ETHERNET DHCP

MAIN MENU

LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM

GOTO COMM PAGE

COMM SETTING

WIIRELESS : SET
NET IP

: SET

NET DHCP

: OFF

LEASED IP TABLE : ENTER
COMM ID

: 01

RS232

: ON

MAIN PAGE

SET NETWORK