Maxtor NVR-2028 사용자 설명서

 

79

Please follow the steps given below to change the LANCAM setting through the network as and 

when necessary. 

(1)  Click the 

button on the home page to enter the setup mode.   

 

(2)  At the top of the page are itemized CAMs 1 to 8, each of which is connected to the 

corresponding camera. So, if you click any of them, the corresponding camera’s information 

will appear in the blank spaces of all the items on the screen. 

(3)  Adjust the LANCAM setup, including all the items on the screen given below: 

Enabled LanCam 

UserName 

Password 

IP Address   

Quality 

Resolution 

Audio 

Motion 

The information in all the above items’ attached spaces can be sent to the NVR. 

(4) Click 

the 

button to submit the new LANCAM setting. 

(5) Click 

the 

button to delete all information given against all the items on the screen. 

(6) Click 

the 

button to return to the home page while the new image setting acts on 

the      images to effect the desired changes instantly. (If the setting has not been changed by 

the above steps, any (re)entry onto the home page will find images in their earlier or original 

setting. )