Maxtor NVR-2028 사용자 설명서

 

81

Please follow the steps below to change the Timer Record setting through the network as and when 

necessary. 

1. Click the 

  button on the home page to enter the setup mode.   

2. Click the 

  connection on the setting page to enter the Timer Record setting 

page. 

 

3. Set the SCHEDULE RECORD to ON to enable the SCHEDULE RECORD function. 

4.  There are two time-periods available for scheduling each day. The Timer Record setting page 

allows users to program the time each day that the NVR will start and stop recording. The time 

is displayed in a 24-hour clock format. If there is a time overlap showing between two continual 

time-period settings, the device will automatically combine the two time-period settings into one 

combined time-period setting. 

5. Click the 

  button to submit the new Timer Record setting. 

6. Click the 

  button to return to the home page while the new image setting acts on 

the images to effect the desired changes instantly. (If the setting has not been changed by the 

above steps, any (re)entry onto the home page will find images in their earlier or original 

setting. )