Maxtor SLD240 사용자 설명서

43 

 

Usually, the unit comes with one hard disk drive installed in compartment HD 1, which is 

default-configured as a master. The jumper settings configuration of the installed hard disk drives for 

the unit and compatible drives which can be used with this unit are listed in the table below. To install 

two hard disk drives in compartment HD 1 and HD 2, please use the following steps.   

 

IDE 1 

Compartment HD 1 

Master 

IDE 2 

Compartment HD 2 

Master   

 

 

1. 

  

 

1.  Unscrew all of the mounting screws on 

the mobile rack of the unit and detach it. 

2. 

  

3. 

 

2.  Carefully lift the mobile rack to a vertical 

position. 
 

3.  Unscrew the secured screws to detach 

the hard disk rack. 

4. 

  

5. 

 

4.  Set the jumper of your hard disk driver. 

The way to set the jumper of the drive 
varies between manufacturers; please 
refer to the instructions on the driver to 
set the jumpers in the master position.   
 

5.  Place the hard disk in the rack.