Swann SW244-DAO 사용자 설명서

User Manual

5.15 Video Mode

Select NTSC (North America) or PAL (Europe/Australia) video system.

5.16 Factory Reset

Press

[ SEL] button to reset the DVR to factory defaults. The DVR will

reboot and all custom settings (including password) will be restored to default.

Caution: There is no confirmation dialog box for this selection after you

press

[ SEL]

button.

If you have forgotten your password and would like to reset, press [Pause]

button 10 times to reset DVR to factory default. Then the default password is now:

[CH1] button 6 times.

If you are unable to stop recording, you must unplug the power supply and

remove the HDD, then reboot the DVR and press [Pause] button for 10 times.

Chapter 6: Recording

6.1 Start Recording

Press [ REC] to start recording (as set in 5.7 Schedule Set).

DVR will display system information on screen.

10%

EACH REC [M] (T) 2008/07/01 16:22:30

- 12 -