Avaya 4601 사용자 설명서

IP Address 
in use by 
another

 

VISUAL INDICATION: All LEDs are steadily lit, except Call Appearance 
Line a, which is flashing. 
CAUSE: The telephone has detected an IP address conflict. 
RESOLUTION: DHCP restart is automatically initiated. No user action 
required. 

No Ethernet

 

VISUAL INDICATION: No LEDs flash when phone is plugged in.
CAUSE: Telephone is not receiving power or when first plugged in, the IP 
telephone is unable to communicate with the Ethernet.
RESOLUTION: Verify the connection to the Ethernet jack, verify the jack is 
Category 5, verify power is applied on the LAN to that jack, etc. 

Password 
Error

 

VISUAL INDICATION: Message Waiting indicators at top of phone and left 
middle of faceplate display a broken flutter for a total of 5 cycles (with one 
cycle being alternating 50 milliseconds on, 50 milliseconds off for 500 
milliseconds followed by 500 milliseconds off), then flash continuously, 
awaiting user entry. 
CAUSE: The PBX does not recognize the password entered.
RESOLUTION: Confirm the password is correct, then try registration 
again, taking particular care to enter the password accurately.

System busy

 

VISUAL INDICATION: Message Waiting indicators at top of phone and left 
middle of faceplate display a broken flutter continuously (alternating 50 
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500 
milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: Most likely, the number of IP endpoints on the PBX is already at 
maximum, Less likely, network resource is unavailable. 
RESOLUTION: The telephone was attempting to access the PBX and was 
not successful. Check the resource being called upon for its availability. If 
the resource appears operational and properly linked to the network, verify 
that addressing is accurate and a that communication path exists in both 
directions between the telephone and the resource. Press * and use the 
same values to retry the process. Or, press # to restart, then re-enter the 
Extension and Password.

System Error

 

VISUAL INDICATION: Message Waiting indicators at top of phone and left 
middle of faceplate display a broken flutter continuously (alternating 50 
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500 
milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: The PBX has an unspecified problem.
RESOLUTION: Press * and use the same values to retry the process. Or, 
press # to restart, then re-enter the Extension and Password. Consult your 
Avaya Media Server administration and troubleshooting documentation.