Avaya IP Office Phone 사용자 설명서

1.  Right click on Start and select Explore | Program Files | Avaya | IP Office  

Manager. Save all xxx.cfg files (where xxx is the name of the configuration) to a 
separate safe location. Make a note of the location of where the IP Office suite is 
located and the name of the Program folder; also record all the components used in 
the installation (both will be needed latter). 

2. From 

Start select Settings | Control Panel | Add/Remove Programs. Highlight IP 

Office Admin Suite and remove. The install Wizard will run. Select Remove and click 
Next. Confirm that you wish to remove all components.  

3.  If Read Only files are detected, click OK. If Locked Files are detected, click Ignore. 

Note:  Your configuration and license files will be untouched and available for the 
upgraded software. 

4.  You are provided with the option to reboot your PC. Select Reboot and click Finish. 

The Wizard will run (removing the IP Office Suite). On completion click Finish. 

5.  When your PC has rebooted, insert the Administration CD containing the new 

software. 

6.  The CD Autoruns. You are initially presented with the option to select which language 

you wish to use. Select the language from the pull down list and click OK.  

7.  If not already installed on your PC, you are then given the option to install the 

Microsoft Net 1.1 Framework application. This should be installed if you wish to use 
the IP Office Installation Wizard suite. If you are going to install this application, then 
click OK, agree to the License and on completion click OK. The Welcome screen is 
then displayed; click Next to continue. 

8. The 

Destination folder location option menu is displayed. If you have previously used 

a location other than the default (recorded at step 1 above), then enter this location of 
accept the default location. Click Next. 

9.  Select all the appropriate components and click Next. 
10.  Select the Program folder (recorded at step 1 above) and click Next. 
11.  Installation runs and on completion select Restart now and click Finish twice. 
12.  Do not open the Manager application at this stage. 
13.  Using the Explorer on your PC open up the Program Files | Avaya | IP Office | 

Manager | IP403V1_99 folder. This will contain a file called ip403.bin. This file is 
version 1.99 of the IP Office 403 firmware and contains the loader that is necessary to 
be able to upgrade from Level 1.4 to Level 2.0 and must be used in place of the 
existing ip403.bin file. Copy this file to the Manager folder within the IP Office suite on 
your PC, that is, Program Files | Avaya | IP Office | Manager, to overwrite the 
existing ip403.bin file. 

14.  Open the Manager application and from File select Advanced | Upgrade. 
15.  A window similar to the following is displayed: 

 

16. The current Version and Available versions are displayed. Tick the check-box under 

Name if it is not already ticked then click on Upgrade. 

17.  Enter the password of the existing configuration (not the default). Click OK and IP 

Office will reboot and undergo the upgrade cycle. This takes around a minute to 
complete. On completion, click OK to finish. This will close the UpgradeWiz window. 

18.  Using the Explorer on your PC open up the Program Files | Avaya | IP Office | 

Manager | IP403V2_0 folder. This will contain a file called ip403.bin. This is the Level 
2.0 IP Office firmware. Copy this file to the Manager folder within the IP Office suite 
on your PC, that is, Program Files | Avaya | IP Office | Manager, to overwrite the 
existing ip403.bin file. 

19.  Repeat steps 2 – 11 followed by 13 - 17 of the above procedure. 
The upgraded software will now be running with the existing (previous) configurations and 
licenses intact.