Sayson Technologies 390 사용자 설명서
Call Waiting
The 390 and 480 phones are enabled to receive the
caller ID of the call waiting. When the call waiting
tone sounds, the call waiting screen will appear.
caller ID of the call waiting. When the call waiting
tone sounds, the call waiting screen will appear.
Press the CallWtg softkey to answer the second
phone call, putting the first call on hold. The new call’s
caller ID information will be diplayed on a new screen.
To return to the first call, press the Swap softkey.
caller ID information will be diplayed on a new screen.
To return to the first call, press the Swap softkey.
Sayson 390/480 for Sphericall User Guide
20
Sayson 390/480 for Sphericall User Guide
21
Note: The Flash softkey will also return to the first call
but may cause unpredictable results at times. It is recommended
you only use the Swap softkey.
you only use the Swap softkey.
If the second call is not answered, it is forwarded to
voice mail. The phone will return to the Connected
State screen after six seconds.
voice mail. The phone will return to the Connected
State screen after six seconds.
Hangup
This softkey disconnects the currently connected call.
Placing a Call on Hold
To place a call on hold, press the Hold softkey. A
hold screen will appear. Press UnHold to return to
the call. You can also use this method to switch
between your current call to a call that is on hold.
between your current call to a call that is on hold.
Tip: Do not use the
button at the top of
the phone to place callers on hold. This simply mutes
the call and they will not hear any on-hold music con-
nected to your system.
the call and they will not hear any on-hold music con-
nected to your system.
Timing a Call
When you make or answer a call, the Timer shows the
elapsed time of the call.
elapsed time of the call.