Siemens Gigaset S450IP 사용자 설명서

Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / appendix.fm / 17.1.07

Ve

rs

ion 4,

 16

.09.

2005

¤

Wipe down the base station and hand-

set with a damp cloth (no solvents) or 

an antistatic cloth. 

Never use a dry cloth. This can cause a 

static build up. 

If the handset has come into contact with 

liquid:

¤

the batteries immediately. 

¤

Allow the liquid to drain from the hand-

set.

¤

Pat all parts dry, then with the battery 

compartment open and the keypad fac-

ing down place the handset in a warm, 

dry place for at least 72 hours (not in 

a microwave, oven etc.).

¤

until it is completely dry. 

When it has fully dried out, you will nor-

mally be able to use it again.

www.siemens.com/gigasetcustomercare

at any time. You will also find a list of com-

mon problems and possible solutions in 

the detailed user guide.

(Valid at the time of going to press)

Nickel-metal-hydride (NiMH):
u Sanyo Twicell 650
u Sanyo Twicell 700
u Panasonic 700 mAh "for DECT"
u GP 700mAh
u Yuasa Technology AAA Phone 700
u VARTA Phone Power AAA 700mAh
u GP 850mAh
u Sanyo NiMH 800
u Yuasa Technology AAA 800
The handset is supplied with two recom-

mended batteries.

The following information relates to bat-

teries with a capacity of 650 mAh.

The operating and charging times apply 

only when using the recommended bat-

teries.

Depending on current status, around 

2.5 W.

Standby time

approx. 170 hours (7 days)

Talktime

approx. 13 hours

Charging time

approx. 6 hours

When the display backlight is switched on, the 

standby time of the handset is reduced to 

approx. 30 hours.