Siemens 30ISDN 사용자 설명서

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

The connection code is a number under which a call can 

be parked and later resumed (➔ page 18: ”Parking a call“). 

The permitted values are 1 to 99 or “none“ (no input).

The date and time are preset with zeros by default. The 

correct date and time are set automatically by the switch-

ing centre the first time an outgoing call is set up.  If your 

network operator does not support this service, you can 

program the date and time yourself. Your input is checked 

for plausibility.

You can forward calls to another telephone in order to be 

always reachable under your call number (➔ page 12: 

”Call forwarding“).

The call number of the other telephone (including area 

code) must have been programmed before activating call 

forwarding.

a or d

Handset is on-hook, or a call is in progress.

S05

Start the programming procedure.

T

Enter the password if necessary.

T

Enter the connection code.

S

Save the setting.

a

Handset is on-hook.

S13

Start the programming procedure.

T

Enter the password if necessary.

T

Enter first the date and then the time (e.g. “0709981022” 

for September 7, 1998 7-09-98 10.22 a.m.).

Please note that you have to differentiate between a.m. 

and p.m. in the following way:

“... 1030” stands for 10.30 a.m.

“... 2230” stands for 10.30 p.m.

S

Save the setting.

a

Handset is on-hook.

S02

Start the programming procedure.

T

Enter the password if necessary.