Siemens 30ISDN 사용자 설명서

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Before you switch on the charge meter, you should enter 

the tariff unit factor, i.e. the costs calculated by your net-

work operator for each call charge unit.

If the display of charge/call time for the active (current) call 

is activated, the display alternates between the call 

number and the call charge (if incurred)/call time.

Enter 0 or 1 to deactivate or activate the display of charge:

●

”0“ Display  of charge /call time of the active call is 

deactivated 

●

”1“ Display of charge /call time of the active call is 

activated 

In the as-supplied condition, the display of charge/call 

time of the active call is activated.

T

Enter the call number for call forwarding.

S

Save the setting.

The call charges incurred in connection with call 

forwarding (e.g. car telephone/mobil telephone) 

are not displayed on the Profiset 30isdn nor reg-

istered on the summation meter.
The caller only pays for the connection between 

his or her phone and the initial destination; the 

remainder of the connection must be paid for by 

the party who has activated call forwarding.

a

Handset is on-hook.

S15

Start the programming procedure.

T

Enter the password if necessary.

T

Enter the tariff unit factor.

S

Save the setting.

Note:

Enter the number of three decimal places for 

the tariff unit factor.

a

Handset is on-hook.

S16

Start the programming procedure.