Grandstream Networks BT200 사용자 설명서

 

Grandstream Networks, Inc. 

Page 16 of 37  

Last Updated:  12/2006

 

 

This section of the BT200  manual will help guide you to configure your phone, either using the keypad or 
through the web interface.  Examples of the web interfaces can be downloaded @ 

 

 
 

Configuring the BT200 using the key pad is simple.  If at anytime the phone rings or there is a 20+ second 
idle time, while in the configuration state, the phone will exit the configuration menu.  You can answer an 
incoming call as usual during the configuration stage.  
 
First, be sure your phone is not in use.  Press the MENU button to enter key pad menu.  There are eleven 
main menu functions ranging from 1 – 11. Navigate the menu options using the navigation keys on the 
keypad.

   

 

Display “[1] dhcP On ” or “[1] dhcP oFF” for the current selection 
Press MENU key to enter edit mode 
Press ‘↓’ or ’↑’ to toggle the selection 
Press MENU  to save and exit 
Must recycle power for changes to take effect. 

Display “[2] IP Addr ” 
Press MENU to display the current IP address 
Enter new IP address if DHCP is OFF 
Press ‘↓’ or ’↑’ to exit 
Press MENU to (save and) exit 
Must recycle power for changes to take effect. 

Display “[3] SubNet  ” 
Press MENU to display the Subnet mask 
Enter new Subnet mask if DHCP is OFF 
Press ‘↓’ or ’↑’ to exit 
Press MENU to (save and) exit 
Must recycle power for changes to take effect. 

Display “[4] routEr  ” 
Press MENU to display the Router/Gateway address 
Enter new Router/Gateway address if DHCP is OFF 
Press ‘↓’ or ’↑’ to exit 
Press MENU to (save and) exit 
Must recycle power for changes to take effect.