Avaya 3600 Series 사용자 설명서

Turn the WT on  Press and hold the 

key for about one second, until two 

chirps sound. Release the key. The in-service tone sounds and the 
extension number displays. The WT is now in standby mode, 
ready to make and receive calls. 

Turn the WT off  While in standby mode, press and hold the 

 key. One 

chirp sounds and the WT turns off. The WT cannot be directly 
turned off during a call. End the call first and then turn the WT 
off. 

Press the 

 key and then dial the number. 

Select a line  If multiple lines are available, your telephone system may require 

you to select a line before dialing a number. Press the 

 key 

and the number key of the line you wish to use. You will hear a 
dial tone. 

Dial a number  Dial calls with the WT exactly as with your desk phone. You may 

dial extension numbers, internal numbers, or make external calls, 
depending on the setup of your PBX. You willhear a dial tone, 
then press the number keys to dial the number. 

Answer a call  The WT will ring or vibrate to alert you to an incoming call. 

Additionally, a line number on the display may flash, and the 
display may show information about the call, such as caller’s 
name and extension. 

To answer a call, press the 

 

 key, hold the earpiece to 

your ear and speak with a normal tone of voice. 

If you are on a call and hear subdued ringing, a call is coming in 
on a second line. The line number on the display may be flashing. 
To answer this call, put your first call on hold and press the 

 

key, then press the line number of the second call. 

Headset answer  When a headset is plugged into the WT, the 

 

, 

 or 

 key may be pressed to answer a call. 

Hang up  To hang up, press the 

 

 key. Be sure to do this at the end 

of each call. 

Unlock Keypad  Press the 

 softkey, then 

, to unlock the keypad. 

Lock Keypad  Press 

, then 

, to activate 

 

 on the Standby 

menu. 

Change speaker volume  You may increase or decrease the volume of the speaker while in 

a call by pressing the corresponding 

 and 

 buttons 

located on the left side of the WT. 

Change ring volume  You may increase or decrease the ringing volume on the 3626 

WT by pressing the corresponding 

 and 

 buttons located 

on the left side of the handset while it is ringing. 

Silence while ringing  You may silence a ringing WT by pressing the 

 

 button. 

This action does not interrupt the call and the caller may leave a 
voicemail message. Ringing volume may not be changed. 

Backlight  The backlight comes on when any key is pressed or when there is 

an incoming call and stays on for ten seconds. It turns off after ten 
seconds if another key is not pressed within that period. 

21-300632, Issue 1, July 2005 

Page 10