Viewsonic PJ751 사용자 설명서

ViewSonic  PJ751

With the INPUT menu, the four items shown in the Table below can 

be performed. With inputting of RGB IN 1 and RGB IN 2 signals, the 

horizontal and vertical frequencies of the signals will be displayed on 

the initial screen of the INPUT menu.

Perform each operation according to the instructions in the Table.

Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H PHASE, and 

H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): Automatically selects the proper VIDEO mode for the 

current input signal. This function is active only when the AUTO mode is selected for the 

item VIDEO. Refer to the description for the item VIDEO below.
This function may not be available with a PAL60 signal and certain other signals.
The AUTO mode operation requires approximately 10 seconds.
For COMPONENT VIDEO, the signal type is identified automatically even if this function 

is inactive. For a HDTV signal, refer to the item HDTV below.

Select Mode of Signal Type (for VIDEO/S-VIDEO):

AUTO  

NTSC  

PAL  

SECAM 

NTSC4.43  

M-PAL  

N-PAL

Selecting AUTO mode activates and performs the AUTO function for VIDEO/SVIDEO. It 

automatically selects the proper mode from among those above. Use this function if the 

image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or 

lacks color.)
AUTO mode may not function correctly with a PAL60 signal and certain other signals.
The AUTO mode operation requires approximately 10 seconds.
For COMPONENT VIDEO, the signal type is identified automatically even if this function 

is inactive. For a HDTV signal, refer to the item HDTV below.

Select HDTV Signal Mode:

1080i  

1035i

If the selected HDTV mode is incompatible with the input signal, the picture may be dis-

torted.

On/Off SYNC ON G Mode:

TURN ON 

 TURN OFF

Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows 

reception of SYNC on G.
In the SYNC ON G mode, the picture may be distorted with certain input signals. In such 

cases, remove the signal connector so that no signal is received and turn SYNC ON G 

off, and then reconnect the signal.

Example: INPUT Menu

(AUTO)