Viewsonic PJ751 사용자 설명서

ViewSonic  PJ751

Registration of MyScreen:
When this item is executed, the MyScreen Menu for registration of MyScreen for the 

BLANK Screen and the START UP Screen is displayed. When operations are per-

formed in accordance with this Menu, one can “cut” and register desired screens from 

among the received images within the display.
After the “Do you start capturing this picture?” message has been displayed, pressing 

the ESC (or RESET) button interrupts execution of the MyScreen. When the ENTER 

button is pressed, the picture becomes static (no longer moves), and a frame for picture 

cutting, as well as the message that follows below, appear. Please press the button 

when the screen you want to register is currently being displayed.
When the “Move the capture area as you want.” message has been displayed, pressing 

the ESC (or RESET) button will eliminate the static state of the picture, and operations 
can be performed again from operation 1. The frame can be moved using the 

, 

, 

, 

 buttons. After designating the screen you want to register, press-

ing the ENTER button will initiate screen registration. The registration process takes 

approximately 1 minute to complete.
When the registration has been completed, the screen of the registered MyScreen, and 

the message, “MyScreen registration is finished,” will be displayed for several seconds, 

after which the operation is terminated.

x1  

FULL

TURN ON 

 TURN OFF

When TURN ON is selected, the MyScreen category (see this Table, above) cannot be 

executed. In this way, one can prohibit rewrites (“writeovers”) of the MyScreen.