Addlogix HKDW-702 사용자 설명서

1-4 (E)

HKDW-702

1.

Remove the inside panel.

2.

Remove the two screws (P2 

x 4) and remove the CN

BOX sub panel.

3.

Attach the VIDEO OUT assembly with the two screws
(P2 

x 4) by routing the coaxial cable through the

groove.
m
. When installing the VIDEO OUT assembly, route

the coaxial cable through a groove.

. If the coaxial cable is pinched by the VIDEO OUT

assembly and the frame, the coaxial cable can be
damaged.

n
Standard tightening torque value :

Screw P2 

x 4

16 to 22 

x 10

_2

 N

.m (1.6 to 2.2 kgf.cm)

P2 

x 4

CN BOX sub panel

Coaxial cable 
(black)

Groove

P2 

x 4

VIDEO OUT assembly

*1

*1

Step 2

1.

Align the hole of the shield plate with connector
(CN6) of the DCP-28 board and insert the connector
(CN6) of the DC-110A board to the connector (CN6)
of the DCP-28 board.

2.

Attach the DC-110A board with the three screws (P1.4
x 3.5) supplied.
n
Standard tightening torque value :

Screw P1.4 

x 3.5

0.1 N

.m (1.0 kgf.cm)

3.

Connect the coaxial cable (black) coming from the
VIDEO OUT assembly to the connector (CN1) of the
DC-110A board.

1-5. Installing the VIDEO OUT Assembly
1-6. Installing the HKDW-702 (DC-110A Board)

DC-110A 
board

Precision 
screws 
P1.4 

x 3.5 

DCP-28 board

Hole

Coaxial cable 
(black)

CN1

CN6

CN6

Shield plate