Addlogix HKDW-702 사용자 설명서

1-5 (E)

HKDW-702

Perform the following procedure only when the VBS SETUP level is desired to be
set to 7.5%.

1.

Open the inside panel and set the switch S1-1 on the AT-143 board to ON.

2.

Turn on the main power.

3.

While pressing the rotary encoder, set the MENU ON/OFF switch to ON and
open the TOP menu.

4.

Select the MAINTENANCE menu and press the rotary encoder.

5.

Let the SD LEVEL ADJ display appear on the screen and press the rotary
encoder.

6.

Move the cursor (

→) to SD VBS SETUP LEVEL and press the rotary encoder

so that the VBS SETUP is set to 7.5%.

Rotary
encoder

CANCEL/PRST

OFF

ON

ESCAPE

MENU

ON/SEL

OFF

STATUS

STATUS ON/
SEL/OFF switch

MENU ON/OFF 
switch

MENU CANCEL/PRST/
ESCAPE switch

?S04

O

SD LEVEL ADJ  

 SD VBS LEVEL    :     0
 SD VBS SETUP LVL:? 7.5%

 SD VF Y LEVEL   :     0
 SD VF R-Y LEVEL :     0
 SD VF B-Y LEVEL :     0

→

1-7. Setting the SD VBS SETUP Level