Lincoln Electric SVM125-A 사용자 매뉴얼

차례

• Master TOC

  6
• Safety

  2
• Section A Installation

  7
• Section B Operation

  15
• Section C Accessories

  29
• Section D Maintenance

  37
• Section E Theory of Operation

  45
• Section F Troubleshooting & Repair

  51
• Symptoms

  54
  • The engine starts and runs at correct speed, but there is no, or very low, welder output voltage. There...

    54
  • The engine starts and runs at correct speed, but there is no, or very low, welder output voltage. The AC...

    55
  • The welding output varies abnormally. The auxiliary output remains constant. The engine is operating correctly.

    56
  • The engine starts and runs at the correct speed, but there is no AC auxiliary output voltage. The DC...

    57
  • The engine starts and runs normally. The machine takes a long time to “build-up” and produce output...

    57
  • The engine will not return to low idle when the welding and auxiliary loads are removed.

    58
  • The engine will NOT go to high speed when a load is applied to the welding output terminals. The

    59
  • The engine will NOT go to high speed when a load is applied to the AC auxiliary receptacles. The

    59
  • The engine will NOT go to high speed when either a welding load or an auxiliary load is connected to

    60
  • The engine will not shut down.

    60
  • The engine “cranks” but will not start.

    61
  • The engine starts but shuts down after a short period of time.

    61
  • The welding arc is loud and spatters excessively.

    62
  • The welding arc frequently “pops out.”

    62
• Section G - Electrical Diagrams

  99