Manual Do Utilizadoríndice analíticoMaster TOC6Safety2Section A Installation7Section B Operation15Section C Accessories29Section D Maintenance37Section E Theory of Operation45Section F Troubleshooting & Repair51Symptoms54The engine starts and runs at correct speed, but there is no, or very low, welder output voltage. There...54The engine starts and runs at correct speed, but there is no, or very low, welder output voltage. The AC...55The welding output varies abnormally. The auxiliary output remains constant. The engine is operating correctly.56The engine starts and runs at the correct speed, but there is no AC auxiliary output voltage. The DC...57The engine starts and runs normally. The machine takes a long time to “build-up” and produce output...57The engine will not return to low idle when the welding and auxiliary loads are removed.58The engine will NOT go to high speed when a load is applied to the welding output terminals. The59The engine will NOT go to high speed when a load is applied to the AC auxiliary receptacles. The59The engine will NOT go to high speed when either a welding load or an auxiliary load is connected to60The engine will not shut down.60The engine “cranks” but will not start.61The engine starts but shuts down after a short period of time.61The welding arc is loud and spatters excessively.62The welding arc frequently “pops out.”62Section G - Electrical Diagrams99Tamanho: 2 MBPáginas: 110Language: EnglishAbrir o manual