데이터 시트 (INA230EVM)차례INA230EVM Evaluation Board and Software Tutorial11 Overview31.1 INA230EVM Kit Contents31.2 Related Documentation from Texas Instruments42 INA230EVM Hardware Setup42.1 Theory of Operation for INA230 Hardware42.2 Signal Definitions of H1 (10-Pin Male Connector Socket)52.2.1 Theory of Operation for SM-USB-DIG Platform53 INA230EVM Hardware63.1 Electrostatic Discharge Warning63.2 Connecting the Hardware63.3 Connecting Power73.4 Connecting the USB Cable to the SM-USB-DIG Platform83.5 INA230EVM Default Jumper Settings93.6 INA230EVM Features103.6.1 J2: I2C VS Control Setting103.6.2 J3 and J4: I2C Address Hardware Setting (A0)103.6.3 J5 and J6: I2C Address Hardware Setting (A1)103.6.4 External I2C Lines and Terminal Block T1103.6.5 VIN+ and VIN– Input filter (R1, R2, and C1)113.6.6 Shunt Monitor Configuration and Terminal Blocks T3 and T4114 INA230EVM Software Setup124.1 Operating Systems for the INA230EVM Software124.2 Software Installation125 INA230EVM Software Overview155.1 Starting the INA230EVM Software155.2 Configuring the INA230EVM Software165.2.1 I2C Address Selection165.2.2 Configure Operating Mode175.2.3 Set Conversion Times185.2.4 Set Configuration Register195.2.5 Configuring the Alert Pin195.3 Using the INA230EVM Software205.3.1 INA230 Bus Voltage, Shunt Voltage, Current, and Power Reading Bar205.3.2 Calculation and Theory of Operation205.3.3 Register Tab215.3.4 Graph Tab225.3.5 Auto-Write and the Supply Voltage226 INA230EVM Documentation236.1 Schematic236.2 PCB Layout246.3 Bill of Materials25Important Notices26크기: 846킬로바이트페이지: 31Language: English매뉴얼 열기