Zebra Technologies P1058563-003 Manual Do Utilizador
WebLink Set/Get/Do Commands
weblink.ip.conn[1|2].enable
weblink.ip.conn[1|2].enable
72
P1058563-003
10/31/13
weblink.ip.conn[1|2].enable
Description This command enables or disables the weblink IP connection #1.
A side effect of setting this SGD to "on", the
weblink.enable will also be set to "on".
When this setting is set to
"off", if the weblink.ip.conn2.enable is also "off", the
weblink.enable will be set to "off".
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
setvar, getvar
Commands
Details
setvar
This command enables/disables the weblink IP connection.
Format:
•
! U1 setvar "weblink.ip.conn1.enable" "value"
•
! U1 setvar "weblink.ip.conn2.enable" "value"
Values:
"on", "off"
Default:
"off"
getvar
This command retrieves the current setting.
Format:
•
! U1 setvar "weblink.ip.conn1.enable"
•
! U1 setvar "weblink.ip.conn2.enable"
Result:
•
"on" if the connection is enabled
•
"off" if the connection is disabled