Zebra Technologies P1058563-003 Manual Do Utilizador
WebLink Set/Get/Do Commands
weblink.ip.conn[1|2].maximum_ simultaneous_connections
weblink.ip.conn[1|2].maximum_ simultaneous_connections
74
P1058563-003
10/31/13
weblink.ip.conn[1|2].maximum_
simultaneous_connections
simultaneous_connections
Description This command indicates the maximum number of simultaneous connections
that can be initiated by the printer.
that can be initiated by the printer.
Via the main connection (the original connection initiated by the printer to the remote server),
the remote server can request that additional connetions from the printer be initated (e.g. a
connection that supports only JSON SGDs, one that behaves similar to the RAW TCP port.
the remote server can request that additional connetions from the printer be initated (e.g. a
connection that supports only JSON SGDs, one that behaves similar to the RAW TCP port.
The server is free to request as many as it thinks it needs, but the printer will prevent more than
N number of connections, where N is the value of this command.
N number of connections, where N is the value of this command.
^JUF, ^JUS, ^JUN, ^JUA
, and
device.restore_defaults
do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
setvar, getvar
Commands
Details
setvar
This command sets the maximum number of connections.
Format:
•
! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "value"
•
! U1 setvar "weblink.ip.conn2.maximum_simultaneous_connections" "value"
Values:
Any integer from 1‐100
Default:
"10"
getvar
This command retrieves the maximum set number of connections.
Format:
•
! U1 getvar "weblink.ip.conn1.maximum_simultaneous_connections"
•
! U1 getvar "weblink.ip.conn2.maximum_simultaneous_connections"
Example •
This example sets the conn1 maximum connections to 3.
! U1 setvar "weblink.ip.conn1.maximum_simultaneous_connections" "3"