Invacare HF2PCM2KIT Manual Do Utilizador

SECTION 4—INSPECTION AND COMPRESSOR INTERFACE

4. Momentarily push DOWN on the outer ring (sleeve) of the

connector fillport to reset the connector as shown in

NOTE: If the outer ring (sleeve) is in the UP position

(GREEN dots not visible), the connector fillport will not

be able to accept the cylinder fillport. Pushing DOWN

momentarily will reset the connector fillport (GREEN

dots visible) to accept the cylinder fillport.

FIGURE 4.2 Resetting Connector Fillport

5. Grasp the cylinder/regulator assembly in the area behind

the cylinder gauge (FIGURE 4.3).

6. Position the cylinder in the compressor cradle (FIGURE

7. Align the cylinder fillport with the connector fillport

8. Pull UP on the outer ring (sleeve) of the connector fillport

while pushing DOWN on the cylinder/regulator assembly

to couple the cylinder fillport into the connector fillport

NOTE: The cylinder is properly connected when an audible “click”

is heard.

BEFORE
COUPLING
CYLINDER,
PUSH DOWN

ON SLEEVE

UNTIL

GREEN DOTS
ARE VISIBLE.

Connector Fillport

Outer Ring (Sleeve)

PUSH

DOWN

GREEN Dots