SPX Cooling Technologies TG MAG86-100 Manual Do Utilizador
14
A.0500.551 – IM-TGMAG/02.00 EN (02/2008)
3.2 Operating principle
3.0 General information and technical data
3.1 Pump standard parts
Top cover
Intermediate cover
Pump shaft
Bearing bracket
Rotor shaft
Pump casing
Idler gear
Pump cover
Idler pin
As the rotor and idler gear unmesh, an underpressure
is created and the liquid enters the newly created cavities.
is created and the liquid enters the newly created cavities.
Liquid is transported in sealed pockets to the discharge side.
The walls of the pump casing and the crescent are creating
a seal and separate suction from discharge side.
The walls of the pump casing and the crescent are creating
a seal and separate suction from discharge side.
The rotor and idler gear mesh and liquid is being pushed
into the discharge line.
into the discharge line.
The pump is assembled to be used for flow in one direction.
Rotor bearing assembly
Separation can
Inner magnetic rotor
Outer magnetic rotor
Idler pin cover