Star Trac 7600 Manual Do Utilizador

 

Service Manual: E-TR and E-TRi 

 

30

ELEVATION ZERO:  Sets the value for 0% (zero percent) for the elevation motor sensor. 

ELEVATION MAX:  Sets the value for 15% (maximum incline) for the elevation motor sensor. 

LAST DECK:  This parameter is used for models with a waxable style running belt.  If you  

  have a waxless style treadmill and REWAX BELT appears on your display,  
  go to the MODEL parameter and make sure your unit is set for the correct  
  model. 

LAST BELT:  A parameter available for you to enter the mileage (DISTANCE) at which the 

  running belt was replaced.  This aids in your record keeping. 

LAST MOTOR:  A parameter available for you to enter the mileage (DISTANCE) at which the 

  drive motor was replaced.  This aids in your record keeping. 

CS AUTO STATUS:  An internal calculation setting.  Leave at default setting. 

MODEL:  Sets the model that the display electronic board will be used on.  Note that  

  some features may not work (fans, scales, entertainment, etc.) if this setting 
  is incorrect. 

HR CALC. TIME:  Sets the amount of time the Heart Rate system will seek to acquire a heart  

  rate reading before it resets and begins seeking again if not detected. 

 
 
The following parameters are used to keep track of which programs users are selecting.  These 
parameters do not affect the functionality of the unit, but can be used to log the types of programs 
users prefer to use. 
 

Check with a Star Trac sales representative for definitions