Nikon 140ED Manual Do Utilizador

Página de 145
43
Additional Information
E
A characteristic of electronic cameras
In rare cases, when strong static electricity or the like is applied to
the camera, the camera may not work properly.
If this happens, remove the battery and re-install it.
When the battery is removed, the date/time you set are cleared.
Reset them after reinstalling the battery. (
 p. 41)
a
Camera shake.
→Gently press the Shutter Release button, or use a
tripod or place the camera on a stable flat surface.
a
Something in front or in back of the subject is in
focus.
→Be sure to center the autofocus frame mark on
the subject before releasing the shutter. When
correct focus cannot be easily achieved, use
the focus lock.
a
The battery is installed with wrong polarities.
→Install it with the correct polarities.
*
a
No battery or dead battery.
→Install a new battery.
*
a
The letter “ ” blinks or lights up.
→Remove the film and load it again.
a
You are out of the remote control working range.
→Operate the remote control in a range within
5m facing the camera.
a
Two or more minutes have elapsed since you set
the camera to the Remote Control mode.
→Set the camera to the Remote Control mode
again.
a
The remote control is operated in backlit.
→Change the position of the remote control.
a
The service life of the battery in the remote
control has lapsed (5 years).
→Install a new battery.
The subject
appears out of
focus in the print.
No indicator
appears even
when the camera
is turned on.
The numeral “ ”
does not appear
even when film is
loaded.
The shutter
cannot be
released using
the remote
control.
Problem
Remote contr
ol (optional)
LCD panel
Ref. page
Check points and solution
Focus
12
12,13
14,15
39
39
39
40
18,19
33,35
22,26
27
*
When the battery is replaced or re-installed, the date and time you set are cleared.
Reset them. (
 p. 41)