Nikon 6MB12911-03 Manual Do Utilizador
34
s
3
Insert the memory card.
XQD memory cards
: Holding the card with
the rear label toward the monitor, slide it
into the XQD card slot until it clicks into
place. The green access lamp will light
briefly.
into the XQD card slot until it clicks into
place. The green access lamp will light
briefly.
CompactFlash memory cards
: Insert the card
into the CompactFlash card slot with the
rear label toward the monitor (q). When
the memory card is fully inserted, the
eject button will pop up (w) and the
green access lamp will light briefly.
rear label toward the monitor (q). When
the memory card is fully inserted, the
eject button will pop up (w) and the
green access lamp will light briefly.
4
Close the card slot cover.
If this is the first time the memory card
will be used after being used or
formatted in another device, format the
card as described on page 36.
will be used after being used or
formatted in another device, format the
card as described on page 36.
D
Inserting Memory Cards
After confirming that you are inserting the card into the correct
slot, insert the memory card terminals first.
slot, insert the memory card terminals first.
Inserting the card into
the wrong slot or inserting it upside down or backwards could
damage the camera or the card.
damage the camera or the card.
Check to be sure that the card is in
the correct orientation.
XQD card
CompactFlash card
Access lamp
Eject button
Direction of
insertion for
left (XQD)
card slot
insertion for
left (XQD)
card slot
Rear label
4
GB
Direction of
insertion for
right
(Compact-
Flash) card
slot
insertion for
right
(Compact-
Flash) card
slot
Rear label