Nikon 6MB12911-03 Manual Do Utilizador
35
s
A
Memory Card Icons
The memory cards currently inserted in the
camera are indicated as shown (the example at
right shows the icons displayed when both an
XQD and a CompactFlash card are inserted). If
the memory card is full or an error has occurred,
the icon for the affected card will flash (
camera are indicated as shown (the example at
right shows the icons displayed when both an
XQD and a CompactFlash card are inserted). If
the memory card is full or an error has occurred,
the icon for the affected card will flash (
Top control panel
A
Using Two Memory Cards
See page 95 for information on choosing the roles played by each card
when two cards are inserted in the camera.
when two cards are inserted in the camera.
A
Removing Memory Cards
After confirming that the access lamp is off, turn the camera off and
open the memory card slot cover.
open the memory card slot cover.
XQD memory cards
: Press the card in to eject it (q).
The memory card can then be removed by hand.
CompactFlash memory cards
: Press the eject button
(q) to partially eject the card (w). The memory
card can then be removed by hand. Do not push
on the memory card while pressing the eject
button. Failure to observe this precaution could
damage the camera or memory card.
card can then be removed by hand. Do not push
on the memory card while pressing the eject
button. Failure to observe this precaution could
damage the camera or memory card.