Panasonic DMC-LX2 Guia De Utilização

Connecting to other equipment

VQT0Y44

 

n

• Set the [TV ASPECT]. (P25)
• Turn the camera and the TV off.

1

Connect the AV cable A 
(supplied) to the [AV OUT] socket 
of the camera.

• Connect the AV cable with the [f] mark 

facing the [w] mark on the [AV OUT] socket.

• Hold 

B

 and then insert or pull the AV 

cable straight.

2

• 

1

 Yellow: to the video input socket

• 

2

 White: to the audio input socket

3

4

• Do not use any other AV cables except 

the supplied one.

• The top and bottom or left and right of the 

picture may be cut off slightly when it is 
displayed due to the characteristics of the TV.

• Depending on the screen mode setting of 

the TV when you connect the camera to a 
wide-screen TV or a high-definition TV, 
the picture may be stretched horizontally 
or vertically and the top and bottom and 
or left and right of the picture may be cut 
off when it is displayed. In this case, 
change the screen mode setting.

• Read the TV operating instructions too.
• Audio playback is in monaural.
• Pictures might be slightly blurred if you 

show them vertically on a television.

• You can view pictures on TVs in other 

countries (regions) which use the NTSC or 
PAL system when you set [VIDEO OUT] in 
the [SETUP] menu. Even if you set [VIDEO 
OUT] to [PAL], the output signal will still be 
NTSC in the recording mode.

n

You can put your SD Memory Card in a 
television with an SD Memory Card slot to 
show still images. 

• You can not play back pictures stored in 

the SDHC Memory Card on a TV that 
does not support the card.

• Depending on the television, some 

pictures may not take up the whole 
screen.

• You cannot play motion pictures. To play 

back motion pictures, connect the camera 
to the TV with the AV cable (supplied).

• You may be unable to play MultiMedia 

Cards.

2

1