Teledyne MODEL T703 Manual Do Utilizador
Operating The T703 over the Serial I/O Ports
Teledyne API T703 Calibrator Operation Manual
110
7.1.5. COM PORT TESTING
The serial ports can be tested for correct connection and output in the COM menu. This test sends a string of
256 ‘w’ characters to the selected COM port. While the test is running, the red LED on the rear panel of the
calibrator should flicker.
256 ‘w’ characters to the selected COM port. While the test is running, the red LED on the rear panel of the
calibrator should flicker.
To initiate the test press the following key sequence.
07223B DCN6378