Panasonic AJ-PX5000G Manual Do Utilizador

– 150 –

[COLOR BARS]

Selects the color bar to use.
[SMPTE]

Uses SMPTE standard color bars.

Uses full color bars.

Uses SPLIT color bars for SNG (Satellite News Gathering).

Uses ARIB standard color bars.

[WFM]

Selects the type of waveform to be displayed on the viewfinder screen or LCD 

monitor when the <USER> buttons (<USER MAIN>/<USER1>/<USER2>) to 

which the waveform monitor function is assigned is pressed.
[WAVE]

Displays as a waveform.

Displays as a vector.

Each time the button is pressed, the display changes in order 

from no display → waveform display → vector display → no 

display.

[WFM DISP]

Selects whether to display the waveform monitor on the viewfinder or on the LCD 

monitor.
[VF]

Displays on the viewfinder.

Displays on the LCD monitor.

Displays on the viewfinder and the LCD monitor.

[S.GAIN OFF]

Selects a method to release super gain mode.
[L/M/H]

Released by changing the <GAIN> switch or <S.GAIN> switch 

(<USER> button).

Released by the <S.GAIN> switch (<USER> button) only.

[DS.GAIN OFF]

Selects a method to release digital super gain mode (accumulated gain).
[L/M/H]

Released by changing the <GAIN> switch or <DS.GAIN> switch 

(<USER> button).

Released by the <DS.GAIN> switch (<USER> button) only.

[D.ZOOM x2]

Selects whether to enable 2x when digital zoom is assigned to the <USER> button 

of the camera.

[D.ZOOM x3]

Selects whether to enable 3x when digital zoom is assigned to the <USER> button 

of the camera.

[D.ZOOM x4]

Selects whether to enable 4x when digital zoom is assigned to the <USER> button 

of the camera.

[FBC(SHUTTER ON)] Selects whether to permit the operation of the flash band compensation (FBC) 

function when the <SHUTTER> switch is set to <ON>.
[ENABLE]

Permits the operation of the flash band compensation function 

with the <USER> button.

Forbids the operation of the flash band compensation function 

with the <USER> button.

[RC CHECK SW]

Selects camera operation when the remote control unit (AJ-RC10G) <CHECK/5> 

button or the extension control unit <REC CHK> button is pressed.

 

f

This item is scheduled to be supported in future 

upgrades.

Recording check function is enabled.

Performs playback.

         are factory settings.

[FILTER INH]

Selects whether white balance memory (Ach or Bch) data is held or not held for 

each CC filter.
[ON]

Holds Ach and Bch memory data (2 memories), regardless of 

the CC filter.

Holds Ach and Bch memory data (8 memories), for each CC 

filter.

[SHOCKLESS AWB]

When the position of the <WHITE BAL> switch is changed, set the time until when 

the white balance starts at the changed position.
[FAST]

Approx. 1 second

Approx. 2 seconds

Approx. 3 seconds

Approx. 10 seconds

Approx. 20 seconds

Moves instantly.

         are factory settings.