Panasonic AJ-PX5000G Manual Do Utilizador

– 152 –

[AGC]

Selects [ON]/[OFF] for [AGC] function that automatically adjusts camera gain.

[AGC LIMIT]

Sets the maximum gain value during [AGC] operation.

[AGC POINT]

Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.

         are factory settings.

[CLIP PROPERTY]

Detailed clip information is displayed on the screen. Items can be individually 

[CARD STATUS]

[CPS PASSWORD]

Sets the CPS encrypted password of the microP2 memory card.
[LOAD]

Loads the CPS password from the SD memory card.

Enter the CPS password.

Deletes the password saved to the device, and disables 

encrypted formats.

[SD CARD]

Displays SD memory card information.

[REMAIN SETUP]

Sets which is displayed, remaining capacity or used capacity, when P2 card 

information is displayed.
[REMAIN]

Displays remaining capacity.

Displays used capacity.

[FREE CAP. OF 

PARTITION]

Displays available space in a partition.

 

f

Displayed only in storage explorer when in USB 

storage mode.

         are factory settings.

[REPOSITION]

Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]

Displays all clips as thumbnails.

Displays only the clips recorded in the same format as the 

system format as thumbnails.

Clips recorded in the same format means that each item of 

[LINE&FREQ], [REC FORMAT], and [AUDIO SMPL RES] in 

the main menu → [SYSTEM] → [SYSTEM MODE] matches the 

current setting status.

Example) [1080-59.94i], [AVC-I100], [24BIT]

Displays only the clips selected with the <SET> button as 

thumbnails. The thumbnails appear in selected order.

Displays only the clips with shot marks added as thumbnails.

Displayed only clips with text memo data attached as 

thumbnails.

Displays only the clips of the selected slot as thumbnails.

[DELETE]

Deletes selected clips.

 

f

To interrupt the deletion process, press the 

<SHIFT> button + <EXIT> button, or the <SET> 

button to cancel the operation. Once a clip is 

deleted, it cannot be restored even if the deletion 

process is aborted.

[FORMAT]

When the [FORMAT] menu is selected, format the P2 card of the specified slot.

 

f

Data deleted as a result of formatting cannot be 

restored. Always check the data before formatting.

[FORMAT(STORAGE)] Formats a storage device connected to the <USB3.0> terminal (host) using the 

specified system in USB storage mode.

 

f

Data deleted as a result of formatting cannot be 

restored. Always check the data before formatting.

 

f

Enabled only for storage explorer, storage 

thumbnail.

[COPY]

Copies the selected clip to a P2 card in any card slot or a storage device.

 

f

Do not turn power off or remove the card during 

copying. Doing so will result in defective clips. If 

a defective clip is created, delete the clip before 

copying it again.

 

f

Combine incomplete clips before copying.

         are factory settings.