Panasonic AJ-PX5000G Manual Do Utilizador
– 153 –
Chapter 7 Menu Operations — Menu list
Item
Description of settings
Remark
[EXPORT]
When in USB storage mode, exports (writes) from the P2 card or SD memory card
to a storage device by units of card.
If [ALL SLOT] is selected, card data from both slots currently in use (slots 1 and 2
or slots 3 and 4) can be combined and exported.
f
Enabled only in USB storage mode.
[IMPORT]
Imports (writes-back) clips from a storage device to a P2 card in units of card
when in USB storage mode.
f
Valid for type S storage only.
f
Only writes back to a card with a serial number
matching the original card serial number.
f
Displayed only in storage explorer.
[REPAIR]
Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result
of sudden power loss during recording or other reasons.
f
Repair may be impossible, depending on how
it was damaged. When repair is impossible, a
yellow indicator is displayed.
[RE-CONNECT]
If clips that were recorded over multiple P2 cards are not recognized as
consecutive clips and the incomplete clip indicator [ ] is displayed, use this
function to restore the clips to the consecutive clips (the original combined clips).
f
Incomplete clips are formed in the following
cases:
- When clips recorded to multiple P2 cards are
- When clips recorded to multiple P2 cards are
copied separately to individual P2 cards.
- When clips recorded to multiple cards are
copied separately to individual storage device
cards and then re-written to P2 cards.
f
Even if only some of the incomplete clips divided
into 3 or more are linked, the incomplete clip
indicator will stay on until all of the clips that
comprise the original clips are linked.
[EXCH. THUMBNAIL] Changes the clip thumbnail to an image with any text memo. This can be
executed while the text memo clip is displayed.
[EXPLORE]
Switches to the information display screens for storage when in USB storage
mode.
f
Enabled only in USB storage mode.
[AUTHENTICATE]
When this menu is selected from the card status screen, a software keyboard
is displayed to enter the CPS password. If the password is entered and [OK] is
selected, the CPS password is set to the camera.
When the set CPS password is successfully authenticated, the message
[AUTHENTICATED SUCCESSFULLY!] is displayed.
is displayed.
[CHANGE PARTITION
NAME]
Sets and changes the storage partition name in USB storage mode.
f
The initial value is the date and time that the
partition was created.
f
Valid for type S storage only.
f
Displayed only in storage explorer.
[DELETE LAST
PARTITION]
Deletes the last storage partition when in USB storage mode.
f
Can only be deleted when the cursor is in the last
partition.
f
Displayed only in storage explorer.
[DELETE FOLDER]
Delete folders in the storage device in the FAT format.
f
Displayed only in storage explorer.
are factory settings.
[THUMBNAIL SETUP]
Item
Description of settings
Remark
[INDICATOR]
Selects an item to display and press the <SET> button. Checked items are
displayed. When [ALL HIDE] is selected, other items cannot be selected.
f
Defective clip indicator (yellow, red), unknown clip
indicator, and incomplete clip indicator are always
displayed, regardless of the settings.
[ALL HIDE]
Hides all indicators.
[MARKER]
Displays the shot mark indicator.
[TEXT MEMO]
Displays the text memo indicator.
[WIDE]
Displays the wide indicator.
[PROXY]
Displays the proxy indicator.
[DATA DISPLAY]
Selects the content to display in the time display area.
[TC]
[TC]
Displays the time code.
[UB]
Displays the user bits.
[TIME]
Displays the record time.
[DATE]
Displays the record date.
[DATE TIME]
Displays the record date and time.
[CLIP NAME]
Displays clip names.
[USER CLIP
NAME]
Displays a maximum of the first 15 letters (for an English
language display) of a user clip name.
[SLOT]
Displays slot number.
[THUMBNAIL
TC]
Displays the time code of the thumbnail position.
[THUMBNAIL SIZE]
Sets the thumbnail size displayed in a thumbnail on the screen.
[SMALL]
[SMALL]
Small (thumbnail display: with 4×3 and property display)
[MEDIUM]
Standard (thumbnail display: 4×3)
[LARGE]
Large (thumbnail display: 3×2)
are factory settings.