Panasonic BL-WV10 Manual Do Utilizador

Getting Started

34

The camera cannot be set 
as a local camera.

Are you attempting to perform Quick Setup on a 
camera already configured using a computer?

•

To use Quick Setup to register cameras as 
local cameras, set the [User Name] and 
[Password] on the [Easy Network Setup] 
screen to the same values already stored in 
the cameras.

Is the firmware version of the camera out of date?

•

Before connecting your cameras to the 
BL-WV10, make sure that each camera’s 
firmware version meets the requirements 
noted on page 6. If necessary, refer to the 
operating instructions included with the 
camera and update the firmware.

Cameras that have been registered as remote 
cameras cannot be re-registered as local cameras 
even after re-initializing.

•

In the [Camera Setup] screen in normal 
mode, erase the camera, then re-initialize it, 
and then perform Quick Setup.

When performing Quick Setup on cameras when 2 
BL-WV10s are in use, those for one of the BL-WV10s 
will be registered as local cameras, but those for the 
other BL-WV10 will be registered as remote 
cameras.

•

First, make sure that the administrator name 
and password for the cameras is identical on 
both BL-WV10s. Next, connect the cameras 
to each BL-WV10 prior to connecting the 
BL-WV10s to each other.

BL-WV10_GS-en.book  Page 34  Wednesday, January 25, 2006  5:18 PM