Avaya 03-300430 Manual Do Utilizador

106

FAIL

The SNI circuit pack cannot communicate with the SNI in slot 6 over the 
circuit path.

1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 6. 

Use display errors to find any SNI-BD errors and check 
display alarms to see if the errors have on-board alarms. Then 

follow the repair procedures for SNI-BD.

2. Use display errors to check the error log for other SNI circuit 

packs with SNI-PEER Error Type 1025. If other SNI circuit packs have 
SNI-PEER Error Type 1025, then replace the SNI in slot 6. Replacing 
an SNI may be service interrupting. See the SNI-BD section for the 
procedure for replacing an SNI.

If other SNI circuit packs do not have SNI-PEER Error Type 1025 errors, 

the problem could be at either of the peer SNI boards. It is arbitrary as to 

which SNI is replaced first. Proceed as follows:

3. Replace this SNI.

4. Replace the SNI in slot 6.

107

FAIL

The SNI circuit pack cannot communicate with the SNI in slot 7 over the 
circuit path.

1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 7. 

Use display errors to find any SNI-BD errors and check 
display alarms to see if the errors have on-board alarms. Then 

follow the repair procedures for SNI-BD.

2. Use display errors to check the error log for other SNI circuit 

packs with SNI-PEER Error Type 1281. If other SNI circuit packs have 
SNI-PEER Error Type 1281, then replace the SNI in slot 7. Replacing 
an SNI may be service interrupting. See 

page 2046 for the procedure for replacing an SNI.

If other SNI circuit packs do not have SNI-PEER Error Type 1281 errors, 

the problem could be at either of the peer SNI boards. It is arbitrary as to 

which SNI is replaced first. Proceed as follows:

3. Replace this SNI.

4. Replace the SNI in slot 7.

 5 of 11