Hunter Fan 42798-01 Manual Do Utilizador

42798-01  •  09/16/09  •  Hunter Fan Company

The motor cover 

adapter has a 

special coating 

on the threads. 

Do not remove 

this coating; the 

coating prevents 

the pipe/ball 

assembly from 

unscrewing. Once 

assembled, do not 

remove the pipe/
ball assembly

.

3.2

3.4

3.1

3.3

Insert the pipe/ball assembly (7) through the ceiling mounting plate cover 

(3) and ceiling mounting plate cover trim ring (4). Feed the wires from the 

fan through the pipe/ball assembly (7).

 Use the Allen wrench (79) to securely retighten the setscrew (8).

Raise the fan and align the slots in the ceiling mounting plate cover (3) 

with the hooks on the ceiling mounting plate (2). Note: To hang the fan, 

you must tilt the ceiling mounting plate cover (3) to an almost vertical 

position so that the ceiling mounting plate cover (3) slots sit on the ceiling 

mounting plate hooks.

Using the provided Allen wrench (79), loosen the setscrew (8) on the 

motor cover adapter to install the pipe and ball assembly (7). When the 

pipe and ball assembly (7)is fully installed, 2-3 threads on the pipe will still 

be visible; this is normal.