Hunter Fan 42798-01 Manual Do Utilizador
9
42798-01 • 09/16/09 • Hunter Fan Company
9
4 • Setting the Remote Transmitter and Receiver
4 • Setting the Remote Transmitter and Receiver
87
86
The DIP switches for the receiver (86) are located on the flat surface of
the receiver. The DIP switches for the transmitter (87) are in the battery
compartment.
Reassemble the ground wire, wedge, pin, ball, and pipe ball screw, in that
order, onto the long pipe/ball assembly. Go back to Step 3.2.
IMPORTANT! Before you change the DIP switch settings, make sure the
battery is not connected to the transmitter.
Remove the screw and ground wire from the pipe.
3.10
3.9
4.1
Optional Pipe/Ball Instructions:
Optional Pipe/Ball Instructions:
When two or more
fans are located near
each other, you may
want to have the
receiver/transmitter
for each fan set to
a diff erent code, so
that the operation
of one fan does not
affect the operation
of the other fans.
3 • Assembling and Hanging the Fan (continued)