Hunter Fan 42737-01 Manual Do Utilizador

Hunter Fan Company 

42737-01 • 11/14/06 

42737-01 • 11/14/06 

Hunter Fan Company

In warm weather, use 
downward air fl ow pattern

In cold weather, use upward 
air fl ow pattern

8-1.  Turn on electrical power to the fan.

8-2. Th

  e fan pull chain controls power to the fan. Th

  e pull chain has 

four settings in sequence: High, Medium, Low and Off .

•  Pull the chain slowly to change settings.

•  Release slowly to prevent the chain from recoiling into the 

blades.

• Th

  e chain uses a breakaway connector that separates if the 

chain is jerked. If this happens, simply reinsert the chain into 
the connector.

8-3.  Ceiling fans work best by blowing air downward (counterclockwise 

blade rotation) in warm weather to cool the room with a direct 
breeze. In winter, having the fan draw air upward (clockwise blade 
rotation) will distribute the warmer air trapped at the ceiling 
around the room without causing a draft. 

8-4.  For cleaning fi nishes, use a soft brush or lint-free cloth to prevent 

scratching. A vacuum cleaner brush nozzle can remove heavier 
dust. Remove surface smudges or accumulated dirt and dust using 
a mild detergent and a slightly dampened cloth. You may use 
an artistic agent, but never abrasive cleaning agents as they will 
damage the fi nish.

8-5.  Clean wood fi nish blades with a furniture polishing cloth. 

Occasionally, apply a light coat of furniture polish for added 
protection and beauty. Clean painted and high-gloss blades in the 
same manner as the fan fi nish.

To Change Airfl ow Direction
Turn the fan off  and let it come to a complete 
stop. Slide the reversing switch on the fan to the 
opposite position. Restart fan.

Reversing 
Switch

1.  Turn power on, replace fuse, or reset breaker.
2.  Loosen canopy, check all connections according to the wiring the 

fan section.

3.  Check the plug connection in the switch housing.
4.  Push motor reversing switch fi rmly left or right to ensure that the 

switch is engaged.

5.  Pull the pull chain to ensure it is on.
6.  Remove the shipping bumpers.

1.  Tighten the blade bracket screws until snug.

2.  Tighten the blade screws until snug.

3.  Check to see if the blade is cracked.  If so, replace all the blades.

4.  Change to an approved speed control.

5.  Be sure that the glass is secure.

6.  Check and tighten the screws in the switch housing mounting 

plate and in the upper and lower switch housing.

1.  If your fan wobbles when operating, use the enclosed balancing kit 

and instructions to balance the fan.

2.  Tighten all blade and/or blade iron screws.

3.  Turn power off , support fan very carefully, and check that the 

hanger ball is properly seated.

If you need parts or service assistance, please call 
888-830-1326 or visit us at our Web site at 
http://www.hunterfan.com.

Hunter Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114