Hunter Fan 45003-01 Manual Do Utilizador

45003-01  •  07/02/2009  •  Hunter Fan Company

All wiring must be in accordance with national and local electrical 
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a 
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch 
in accordance with national and local electrical codes.
4-1.  Before attempting installation, make sure the power is still off. 
4-2.  To connect the wires, hold the bare metal leads together and place 

a wire connector over them, then twist clockwise until tight. For 
all these connections use the wire connectors provided.

4-3.  Connect the bare or green ground wire (grounding) from the 

ceiling to the green ground wire (grounding) from the ceiling plate 
and the green ground wire from the fan.

4-4.  Connect the white wire (grounded) from the ceiling to the white 

wire (grounded) from the fan.

4-5.  Connect the remaining wires as follows:

• The black wire (ungrounded) from the ceiling to the black 

(ungrounded) and the black/white wire (ungrounded) from 
the fan 

 CAUTION:  Be sure no bare wire or wire strands are visible after 

making connections.

4-6.  Turn the wire connectors upward and push them carefully back 

through the ceiling plate into the outlet box. 

4-7.  Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the 
outlet box.

Wire 

Connector