Sanyo SAP-K25AP Manual Do Utilizador

33

                

Check the items listed in below table after installation of air conditioner.

    •  Do not switch on power before installation is finished completely
    •  Electric wiring must be connected correctly and securely.
    •  Cut-off valves of the connection pipes should be opened.
    •  All the impurities such as scraps and thrums must be cleared from the unit.

    •  Switch on power, press "ON / OFF" button on the wireless remote controller to start the 

operation. 

     
    •  Press MODE button, to select the “COOL”, “FAN” mode to check whether the operation is 

normal or not. 

      

• Has it been fixed firmly?

• The unit may drop, shake or emit noise.

• Have you done the refrigerant leakage 

test?

• It may cause insufficient of cooling 
  capacity.

• Is heat insulation sufficient?

• It may cause condensation and dripping

• Is water drainage well?

• It may cause condensation and dripping.

• Is the voltage in accordance with the rated 
  voltage marked on the nameplate?

• It may cause electric malfunction or 
  damage the part.

• Is the electric wiring and piping connection 
  installed correctly and securely?

• It may cause electric malfunction or 
  damage the part

• Has the unit been connected to a secure 
  earth connection?

• It may cause electrical leakage.

• Is the power cord specified?

• It may cause electric malfunction or 
  damage the part

• Is the inlet and outlet been covered?

• It may cause of insufficient cooling 
  capacity.

• Has the length of connection pipes and 
  refrigerant capacity been recorded?

• The refrigerant capacity is not accurate.