Friedrich US12 Manual Do Utilizador

115V~

230V~

Power cord may include a current interrupter 
device. A test and reset button is provided on the 
plug case. The device should be tested on a 
periodic basis by first pressing the TEST button 
and then the RESET button. If the TEST button 
does not trip or if the RESET button will not stay 
engaged, discontinue use of the air conditioner and 
contact a qualified service technician.

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in 
death, fire, or electrical shock.

Use Wall Receptacle

Power Supply

Standard 125V, 
3-wire grounding
receptacle rated 
15A, 125V AC

Standard 250V,
3-wire grounding
receptacle rated 
15A, 250V AC

Use 15 AMP. time
delay fuse or 15 AMP.
circuit breaker.

Use 20 AMP. time
delay fuse or 20 AMP.
circuit breaker.

Standard 250V, 
3-wire grounding
receptacle rated 
20A, 250V AC

Because of potential safety hazards, do not use an extension cord. 

■

All wiring should be done in accordance with local electrical codes and regulations.
NOTE : Aluminum house wiring may pose special problems. Consult a qualified electrician. 

IMPORTANT GROUNDING INSTRUCTIONS 
The air conditioner has a three-prong grounding
plug on its power supply cord, which must be
plugged into properly grounded three-prong wall
receptacle for your protection against possible
shock. 

FUSE – Use a time-delay fuse or circuit breaker.
Refer to the nameplate for proper power supply
requirements. 

These units are equipped with a three-prong
grounding plug on the power supply cord, which
must be plugged in to a matching, properly
grounded three-prong wall receptacle for your
protection against possible shock hazard. If such
an outlet is not present, one must be installed by a
qualified electrician in accordance with the National
Electrical Code and local codes and ordinances.