Friedrich US12 Manual Do Utilizador

- Push this button to shift mode of operation from COOL 

→ 

 MONEY SAVER 

→

 FAN.

 

- COOL :

• Fan runs continually for normal cooling operation.

- MONEY SAVER:

• The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on 

and the unit will check the room air to determine if cooling is needed.

- FAN :

• Fan-only operation.

- SHUT-OFF TIME

• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of

hours until shut-off.

• For your sleeping comfort, once Time is set, the 

Temperature setting will raise 2

°

F after 30 min., 

and once again after another 30 min.

• Push Timer button to advance setting from 

1 Hour

 

→

 

2 Hours 

→ 

....

 

→

 

12 Hours maximum.

- START TIME

• If unit is off, use Timer to set number of hours 

before unit starts.

• Push Timer button to advance setting from  

1 Hour

 

→

 

2 Hours 

→ 

.....

 

→

 

12 Hours maximum.

• Use this button to automatically control the 

temperature of the room. 
The temperature can be set within a range 
of 60

°

F to 86

°

F by increments of 1

°

F.

• The setting appears in the display.

• To turn the air conditioner ON, push this 

button. 
To turn the air conditioner OFF, push the 
button again.

• This button takes priority over any other 

button.

• When you first turn it on, the unit is in 

cool mode, at High fan speed, and set at 
a temperature setting of 72

°

F.

• Every time you push this button, it 

advances the setting as follows: 
{High 

→

 Low 

→

 Med 

→

 High}