Honeywell MS-9200UDLS Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

49

When the type has been selected, the following screen will be displayed: 

The programmer can continue adding detectors by pressing the ESC key which will 
return the display to the Add Detector Screen.  

3.6.2.1.2  Delete Detector
Pressing 2 in the Detector Screen will display the Delete Detector Screen which 
allows the programmer to delete a specific detector: 

A flashing cursor will appear in the position of the first asterisk to the left.  The 
programmer keys in the three digit detector address, such as 005.  When the last 
digit is keyed-in, the following screen will be displayed: 

The programmer can continue deleting detectors by pressing the ESC key which 
will return the display to the Delete Detector Screen.

3.6.2.1.3  Edit Detector
The programmer can change a detectors existing or factory default programming by 
pressing 3 in the Detector Screen.  The following screen will be displayed: 

A flashing cursor will appear in the position of the first asterisk to the left.  The 
programmer keys in the three digit detector address, such as 017.  

When the last digit is keyed-in, if the selected address has not been added to 
programming, a screen showing information about a device with the highest address 
that is installed will be displayed.

    ADD DETECTOR
DETECTOR#       005
IS ADDED

      DETECTOR
1=ADD
2=DELETE
3=EDIT

Detector Screen

  DELETE DETECTOR
ENTER DETECTOR#
***

  DELETE DETECTOR
DETECTOR#       005
IS DELETED

  EDIT DETECTOR
ENTER POINT ADDRESS
***