Honeywell MS-9200UDLSE Manual Do Utilizador
Programming and Passwords
Programming
MS-9200UDLS PN 52750:A 11/04/05
45
To access user Programming mode, press the Enter or Mode key. The LCD will display
the following:
the following:
To enter the user Programming mode, press 2. The display will read as follows:
Entering the Master level password (default 00000) will cause the following screen to
appear:
appear:
If the Maintenance level password (default 11111) is entered, the following screen will
appear:
appear:
Note that in the two preceding screens, an arrow appears to inform the programmer that
additional options can be viewed by pressing the keypad down arrow key.
additional options can be viewed by pressing the keypad down arrow key.
1=READ STATUS MODE
2=PROGRAMMING MODE
3=MANUAL DIAL MODE
2=PROGRAMMING MODE
3=MANUAL DIAL MODE
PROGRAMMING
ENTER PASSWORD
*****
ENTER PASSWORD
*****
PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
PROGRAMMING
1=POINT PROGRAM
2=HISTORY
3=PROGRAM CHECK
1=POINT PROGRAM
2=HISTORY
3=PROGRAM CHECK