Lightolier ADS8G16MS140 Folheto
VP PARABOLIC
ADS8G16MS140
Page 2 of 2
8”x48” RECESSED FLUORESCENT16 CELL PARABOLIC LOUVER
STATIC IES RP24 PREFERRED
40
1
16
G
8
S
AD
Advance
Technology
Full Width
Refector Louver
48” in length
Fixture Width
8 = 8
Ceiling Type
G = Grid
(Lay in T-Bar)
Number of
Cells
Louver finish
MS-Low
Iridescence
Reflector Matte
PS-Low Iridescence
CFI Anodized
Specular
Lamp Quantity
Lamp
Length
40 = 48”
Voltage
120
277
347
Ballast Type
OC = T8
SO = Electric
T8
DI = dimming
Options
Add appropriate
suffix to calalog
no., ie HRD)
Body Style
S=Static
Consult factory for availability of louver finishes.
SPECIFICATIONS
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1 reflectance 80% ceiling, 50% post-wall, 20% floor the CU. shall no be
less than 0.69. To prevent glare the VCP shall not be less than 88 either length-
wise or crosswise (at 100 fc level) and that the average luminance will conform
with the IES RP-24 preferred standard, and have a fixture efficiency of not less
than 60%.
MATERIALS: Chassis parts are die-formed 20 gauge cold rolled steel.
LOUVER:Post-anodized aluminum.
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1 reflectance 80% ceiling, 50% post-wall, 20% floor the CU. shall no be
less than 0.69. To prevent glare the VCP shall not be less than 88 either length-
wise or crosswise (at 100 fc level) and that the average luminance will conform
with the IES RP-24 preferred standard, and have a fixture efficiency of not less
than 60%.
MATERIALS: Chassis parts are die-formed 20 gauge cold rolled steel.
LOUVER:Post-anodized aluminum.
FINISH: Louver - Low iridescense specular post-wall, anodized vertical grain
sheet or Low iridescence reflector matte post-anodized vertical grain sheet.
Chassis exterior white baked polyester powder coat.
ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi-
fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90”.
LABELS:Listed by CSA/UL.
sheet or Low iridescence reflector matte post-anodized vertical grain sheet.
Chassis exterior white baked polyester powder coat.
ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi-
fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90”.
LABELS:Listed by CSA/UL.
Lightolier
a Genlyte Thomas Company
www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
Section 2/Folio G09-10
Job Information
Type: