ONKYO HT-S5300 Manual Do Utilizador

En

• To control Zone 2, you must press the remote controller’s 

ZONE2 first.

■

■

If your Zone 2 speakers are connected to a receiver or inte-
grated amp in Zone 2, use its volume control to adjust the 
volume.

■

• To unmute,
• Press ZONE2 followed by MUTING again.

• Only analog input sources are output by the ZONE 2 LINE 

OUT and FRONT HIGH OR ZONE2 L/R speaker terminals. 
Digital input sources are not output. If no sound is heard when 
an input source is selected, check if it’s connected to an analog 
input.

• While Powered Zone 2 is being used, listening modes that 

require surround back and front high speakers (6.1/7.1), such as 
Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are 
unavailable.

• While Zone 2 is on, 

u functions will not work.

• You cannot select different AM or FM radio stations for your 

main room and Zone 2. The same FM/AM radio station will be 
heard in each room. For example, if you have an FM station for 
the main room, that station will also be used in Zone 2.

• Zones can also be unmuted by adjusting the volume.

Zone 2 turns on, the ZONE 2 indicator lights.

To select an input source for Zone 2, press 
ZONE2, followed by an INPUT SELECTOR.
To select AM or FM press the TUNER input selector 
repeatedly. 

• You cannot select different AM or FM radio stations for 

your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.

q/w

q/w to adjust the volume.